Removal of Sulfur Compounds from Crude Oil by Adsorption onto Copper Oxide Nanoparticles
DOI:
https://doi.org/10.31185/bsj.Vol23.Iss46.1838Keywords:
adsorption; CuO-NPs; desulfurization; crude oil; sol-gelAbstract
This research aims to study the efficiency of copper oxide nanoparticles (CuO-NPs) in adsorbing and desulfurizing crude oil. The nanoparticles were prepared using the sol-gel method and characterized using advanced analytical techniques such as XRD, FESEM, and EDX to confirm their crystalline structure, morphology, and elemental composition. XRD results of crystalline planes of reveals peaks at 31.6, 45.4, 56.4, 66.3, and 75.2 that indexed planes (110), (112), (202), (220) and (004), respectively, was used to characterize the monoclinic structure of CuO-NPs with an average size 34.6 nm calculated using Deby-Sherrer equation, FESEM analysis revealed agglomerated spherical particles at different magnifications. Particle sizes ranged from 42.43 to 87.09 nm; EDX data showed Cu (80.6%), O (13.9%), and C (5.5%). The peaks associated with Cu and O provide strong evidence that the nanocrystals are composed of only CuO-NPs. The highest sulfur removal efficiency of 36.85% was obtained at 298 K using 250 mg of CuO-NPs and a contact time of 50 min. Removal efficiency increased with decreasing temperature and increasing adsorbent dosage and contact time. These results confirm that copper nanoparticles are a promising and effective method for sulfur removal compared to conventional methods, with potential for future industrial applications.
References
REFERENCES
1. Gounder RM. Processing of heavy crude oils: challenges and opportunities. 2019.
2. Svinterikos E, Zuburtikudis I, Al-Marzouqi M. Carbon nanomaterials for the adsorptive desulfurization of fuels. Journal of Nanotechnology. 2019;2019(1):2809867.
3. Hameed Khlaif T, Salim Bded A, editors. Decreasing the sulfur content of crude oil by ultra-sound and activated carbon assisted oxidative method. IOP Conference Series: Materials Science and Engineering; 2019: IOP Publishing.
4. Pedram-Rad T, Es' haghi Z, Ahmadpour A. Adsorptive desulfurization of model gasoline by using modified bentonite. Journal of Sulfur Chemistry. 2019;40(2):149-65.
5. Qasim A, Alwan HH. Enhancement of light Naphtha quality using calcite adsorbent from eggshells by adsorptive desulfurization. South African Journal of Chemical Engineering. 2023;46:196-204.
6. Betiha MA, Rabie AM, Ahmed HS, Abdelrahman AA, El-Shahat MF. Oxidative desulfurization using graphene and its composites for fuel containing thiophene and its derivatives: An update review. Egyptian journal of petroleum. 2018;27(4):715-30.
7. Mguni LL, Yao Y, Nkomzwayo T, Liu X, Hildebrandt D, Glasser D. Desulphurization of diesel fuels using intermediate Lewis acids loaded on activated charcoal and alumina. Chemical Engineering Communications. 2019;206(5):572-80.
8. Aribike DS, Usman MA, Oloruntoba MM. Adsorptive desulfurization of diesel using activated sewage sludge: kinetics, equilibrium and thermodynamics studies. Applied Petrochemical Research. 2020;10(1):1-12.
9. Khodair ZT, Alzubaidy MWM, Almohaidi AMS, Sultan AA, AL-Shimmary SM, Albusultan SS, editors. Synthesis of copper oxide nanoparticles (CuO-NPs) and its evaluation of antibacterial activity against P. aeruginosa biofilm gene’s. AIP Conference Proceedings; 2019: AIP Publishing LLC.
10. Essien EA, Kavaz D, Solomon MM. Olive leaves extract mediated zero-valent iron nanoparticles: synthesis, characterization, and assessment as adsorbent for nickel (II) ions in aqueous medium. Chemical Engineering Communications. 2018;205(11):1568-82.
11. Farouq R, Yousef N. Equilibrium and kinetics studies of adsorption of copper (II) ions on natural biosorbent. International Journal of Chemical Engineering and Applications. 2015;6(5):319.
12. Foo KY, Hameed BH. Insights into the modeling of adsorption isotherm systems. Chemical engineering journal. 2010;156(1):2-10.
13. Akintelu SA, Folorunso AS, Folorunso FA, Oyebamiji AK. Green synthesis of copper oxide nanoparticles for biomedical application and environmental remediation. Heliyon. 2020;6(7).
14. Waris A, Din M, Ali A, Ali M, Afridi S, Baset A, et al. A comprehensive review of green synthesis of copper oxide nanoparticles and their diverse biomedical applications. Inorganic Chemistry Communications. 2021;123:108369.
15. Vijayalakshmi R, Rajendran V. Synthesis and characterization of nano-TiO2 via different methods. Arch Appl Sci Res. 2012;4(2):1183-90.
16. Khan S, Dan Z, Mengling Y, Yang Y, Haiyan H, Hao J. Isotherms, kinetics and thermodynamic studies of adsorption of Ni and Cu by modification of Al2O3 nanoparticles with natural organic matter. Fullerenes, nanotubes and carbon nanostructures. 2018;26(3):158-67.
17. Manikandan B, Murali K, John R. Optical, morphological and microstructural investigation of TiO2 nanoparticles for photocatalytic application. Iranian Journal of Catalysis. 2021;11(1).
18. Singh R, Dutta S. Synthesis and characterization of solar photoactive TiO2 nanoparticles with enhanced structural and optical properties. Advanced Powder Technology. 2018;29(2):211-9.
19. Saod WM, Alaallah NJ, Abdulkareem EA, Hilal NN, AlBiajawi MI. Study of effective removal of nickel and cobalt from aqueous solutions by FeO@ mSiO2 nanocomposite. Results in Chemistry. 2025;13:101992.
20. Florent M, Policicchio A, Niewiadomski S, Bandosz TJ. Exploring the options for the improvement of H2S adsorption on sludge derived adsorbents: Building the composite with porous carbons. Journal of Cleaner Production. 2020;249:119412.
21. Ahmadian M, Anbia M, Rezaie M. Sulfur dioxide removal from flue gas by supported CuO nanoparticle adsorbents. Industrial & Engineering Chemistry Research. 2020;59(50):21642-53.
22. Medina OE, Céspedes S, Galindez JC, Mazo-Suarez C, Forero A, Ruiz MA, et al. Sulfur Removal from Heavy Crude Oils Based on the Adsorption Process Using CuO-and AgO-Modified SiO2-Based Nanomaterials: Experimental and Theoretical Study. Langmuir. 2025.
23. Uddin MK. A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chemical Engineering Journal. 2017;308:438-62.
24. Chen C, Yu J, Song G, Che K. Desorption performance of commercial zeolites for temperature-swing CO2 capture. Journal of Environmental Chemical Engineering. 2023;11(3):110253.
25. Dastanian M, Seyedeyn-Azad F. Desulfurization of gasoline over nanoporous nickel-loaded Y-type zeolite at ambient conditions. Industrial & engineering chemistry research. 2010;49(22):11254-9.
26. Ammar SH, Kareem YS, Ali AD. Photocatalytic oxidative desulfurization of liquid petroleum fuels using magnetic CuO–Fe3O4 nanocomposites. Journal of environmental chemical engineering. 2018;6(6):6780-6.
27. Sadeghi M, Yekta S, Ghaedi H, Babanezhad E. Effective removal of radioactive 90Sr by CuO NPs/Ag-clinoptilolite zeolite composite adsorbent from water sample: isotherm, kinetic and thermodynamic reactions study. International Journal of Industrial Chemistry. 2016;7(3):315-31.
28. Alangari A, Aboul-Soud MA, Alqahtani MS, Shahid M, Syed R, Lakshmipathy R, et al. Green synthesis of copper oxide nanoparticles using genus Inula and evaluation of biological therapeutics and environmental applications. Nanotechnology Reviews. 2024;13(1):20240039.
29. Ullah S, Hussain S, Ahmad W, Khan H, Khan KI, Khan SU, et al. Desulfurization of model oil through adsorption over activated charcoal and bentonite clay composites. Chemical Engineering & Technology. 2020;43(3):564-73.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 م. د. الاء عيسى سلطان قسم علوم الكيمياء، كلية العلوم، جامعة ديالى
This work is licensed under a Creative Commons Attribution 4.0 International License.
